| Rated Capacity |
| a) Drill Pipe Dia-mm. |
60 |
73 |
89 |
| b) Minimum Hole Dia-mm. |
145 |
152 |
203 |
| c) Depth-Meters |
770 |
610 |
475 |
|
| Casing Load-Kgs. |
18,200Kgs.Using double sheave Travelling block Dead end at frame |
| Mast |
|
| Construction |
Tubular steel, Electrically Welded |
| Height |
13Mts. Above ground |
| Gross Load Capacity |
31,820 Kgs. |
| Hook Load Capacity |
18,200 Kgs. With double sheave Travelling Block |
| Raising and Lowering |
2 Hydrualic Cylinder |
| Crown Block |
5 Sheave Plus 1 Catline Sheave |
| Rotary Table |
|
| Type |
Intigral with draw works & pull down Cy.Drive trough torque tube & disc type clutch |
| Opening |
90 mm or 108 mm |
| Retraction |
525mm |
| Drive |
|
| Kelly |
85.72 mm OR 104.77 mm Dia. 8.53 Mts.3Fluted round kelly |
| Pull Down (Optional) |
|
| Type |
2 Hydrualic Cylinder |
| Feed |
762 mm |
| Force |
706 Kgs. For each 7.03 Kg/cm2.hydraulic oil pressure |
| Draw Works |
Barrel Dia. X Length Single line pull Bore drum |
| Hoisting Drum |
178 mm X 216 mm 6820 Kgs |
| Sand Reel |
178 mm X 216 mm 6820 Kgs |
| Clutch |
406 mm, 2 plates mechanical type( air clutch optional) |
| Breaks |
470 mm X 100 mm Mechanical high levarage type double equalised. |
| Drive |
By Chain |
| Trasmission |
Five Speed Forword, One Speed Reverse. |
| Sub Drive Case |
Suitable for mouting automotive gear box & to obtain hydraulic pump drive |
| Hydraulics |
Pump fixed displacement vane type discharge & pressure 80lpm@ 70.3kg/cm2 |
| Mud Pump |
Standerd Optional |
| Model |
CBG-150 CBG-200 |
| Stroke and Liner Size |
150 mm X 140mm / 200 mm X 150 mm |
| Disp.& Pressure/Drive |
885LPM @17.79kg/cm2 / 1361 LPM@20.74Kg/cm2 / "V"Belts/Chain |
| Clutch |
Clow Clutch OR 203 mm, 3 Plates Mechanical |
| Levelling Jack |
4 Mechanical Jack (optional hydraulic) |
| Lighting |
From truck Battery OR Dynamo, optional separate lighting genrator |
| Controls |
Conveniently located |
| Prime Mover |
Truck mounted version all components driven by same truck engine through PTO skid/trailor mounted version all components driven by 100hp desiel engine. |
| Mouting |
4 X 2, 4 X 4, 6 X 4 Truck chasis Or Full / semi trailor mounted |
| Optional Available |
Hydraulic break out , welding generator, semi Auto pull down chuck DTH Attachment, wire line hoist & higher rotary speed Upto 750rpm for core drilling purposes. |
